Tunze Aquarien Technik
Turbelle® nanostream® 6095
Turbelle® nanostream® 6095
Couldn't load pickup availability
Turbelle® nanostream® is a spherical and compact propeller pump used to circulate water in fresh or salt water aquariums as well as in tanks. It is based on the latest state of the art in technology and offers very high reliability requiring less servicing and current consumption. The extraordinary design, which includes a magnet holder and a silence clamp, permits 3D adjustment and an uncomplicated attachment at every point of the aquarium pane.
Turbelle® nanostream 6055 and 6095 can be controlled electronically and ha e been provided with a fish-care function. These pumps can also be controlled by means of all Multicontrollers and are supplied with a 24V power supply unit.
nanostream® design
Turbelle® nanostream® electronic 6055 and 6095 are speed-controlled pumps with a Turbelle® controller operating on safety extra-low voltage, to be employed ideally in every aquarium from 40 to >1,000 liters (10 to >265 USgal.) for simulation of lapping waves or tidal currents. They contain a microprocessor-controlled motor and a Turbelle® controller. The electronic motor adapts its speed automatically to the pump load and always seeks the best efficiency at the lowest possible consumption of energy. The pumps will be stopped immediately in case of blockage. After the blockage has been removed, the pumps will start up automatically after a delay of 20 seconds. The pump driver has been provided with a fish care function, which causes a revolution of the propeller every twenty seconds when the pump is at a standstill. It can be controlled by the Multicontroller / SmartController 7000.
Low motor heat
3D adjustment
Includes Magnet Holder
Includes Silence clamp
Propeller technology
for aquariums from 100 to 1,000 liters
(25 to 265 USgal.).
Flow rate: 2,000 to about 9,500 l/h
(550 to about 2,500 USgal./h)
with Turbelle® Controller
Energy consumption: 5 - 21 W
Power supply unit: 100-240V / 50-60Hz
Cable length: 3 m (118 in.)
Dimensions: ø70mm (2.7 in.)
Output: ø50/10mm (2/.4 in.)
Magnet Holder with Silence clamp up to a glass thickness of 15 mm (1/2").
1: Deutsch, English, Francais (x6045.8888)